Gate Company in Los Feliz - Same-Day Service, Priced Before We Start

Gate Company in Los Feliz, CA

Most gate work in Los Feliz starts with a simple problem: a driveway gate no longer swings or latches the way it did when the house was built in the 1920s or 1930s. We install, repair, and automate gates for the Spanish Colonial and Craftsman homes that define this hillside neighborhood, where sloped driveways and original ornamental iron mean off-the-shelf hardware rarely fits. If you need gate installation or a repair that accounts for Los Feliz’s steep streets and period ironwork, call (855) 490-6590. We answer 24/7.

Call (855) 490-6590

Why Los Feliz Homes Are Different

Los Feliz is not a neighborhood of uniform track homes. The housing stock above Los Feliz Boulevard dates largely to the 1910s through 1930s, with Spanish Colonial Revival, Craftsman, and Mediterranean homes set behind stucco garden walls and original wrought-iron fencing. Those properties often have driveway gates that were custom-welded for a specific sloped apron or built from wood that has now baked through decades of Southern California sun. The dry, hot summers here do not rot wood the way humid climates do; instead they split gate stiles and fade finishes. Winter rains swell the wood and expose rust at hinge points and latches. That means most Los Feliz gate failures happen at the hardware first, not the panel itself.

Steep, narrow hillside streets add another layer. A gate hung on a sloped driveway needs different swing geometry than one on flat ground, and a standard replacement hinge or automatic opener has to be adapted on-site. The original ornamental iron on many 1920s Spanish-style properties is also worth restoring rather than scrapping, which calls for a technician who can weld and re-hinge in place instead of ordering a factory replacement that never quite matches. We work on those gates regularly, and approaching them as security infrastructure rather than simple mechanical hardware changes how the whole job is done.

Our Main Los Feliz Services

Two services account for most of our calls in Los Feliz: repairing existing gates, and repairing the electric operators that automate them. Each has its own dedicated page with pricing and details.

Gate Repair in Los Feliz

A sagging gate on a hillside driveway is a security problem before it is a convenience problem. Our Gate Repair in Los Feliz service covers re-hinging original iron gates, rebuilding split wood stiles, replacing latch hardware, and correcting swing geometry on sloped aprons. Most repairs in this area involve adapting hardware to the existing gate rather than replacing the whole assembly, especially on 1920s and 1930s homes where the gate is part of the property’s character.

Electric Gate Repair in Los Feliz

Automated gates on Los Feliz hillsides work harder than flatland gates. Operators strain against gravity on sloped driveways, limit switches drift, and control boards get cooked by direct sun exposure. Our Electric Gate Repair in Los Feliz page covers motor diagnostics, control board replacement, safety sensor alignment, and low-voltage wiring faults. We handle LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems without subbing out the electrical work.

Gate Installation in Los Feliz

Gate installation in Los Feliz is rarely a matter of digging post holes and hanging a factory panel. The homes here, mostly built between the 1910s and 1930s, sit on steep hillside lots where driveways slope and existing gates were often custom-fitted decades ago. A new gate has to match the property’s Spanish Colonial or Craftsman character while handling the awkward swing geometry of a sloped apron. Our Gate Installation work covers the full scope: measuring, fabricating or sourcing the right panel, setting posts to proper footing depth, and installing hardware that will hold true on uneven ground.

Automatic Gate Installation

Signs you need it

You are getting out of the car to open your driveway gate every time you leave or return, and the gate was never designed for a motor.

What it costs in Los Feliz

Automatic gate installation in Los Feliz typically ranges from $3,200 to $9,500 for a single driveway gate with operator, depending on gate size, operator brand, and access for wiring.

How we do it

We measure the gate and driveway slope, specify an operator sized for the panel weight and cycle frequency, run low-voltage conduit and power, mount the operator, and set safety sensors and limit switches before testing the full cycle.

Driveway Gate Installation

Signs you need it

Your existing driveway gate is rusted through at the hinges, split beyond repair, or simply too narrow for modern vehicles.

What it costs in Los Feliz

Driveway gate installation in Los Feliz typically runs $1,800 to $6,500 for a standard single-swing steel or wood gate, with custom ornamental iron or oversized panels at the upper end.

How we do it

We remove the old gate, set or reinforce posts to proper footing depth, hang the new panel with adjustable hinges that account for the driveway slope, and install a latch that holds the gate true against the stop.

Sliding Gate Installation

Signs you need it

Your property does not have room for a swing gate to arc across the driveway, or the existing swing gate scrapes the sloped apron.

What it costs in Los Feliz

Sliding gate installation in Los Feliz typically starts around $2,800 and can reach $10,000 or more for heavy cantilever or trackless systems on wide driveways.

How we do it

We lay out the track or cantilever hardware on the existing slope, pour or set the base, hang the panel, and install the motor and guide rollers so the gate moves without binding.

What Gate Installation Costs in Los Feliz

Do I need a permit to install a gate in Los Feliz?

Most cities require a permit when new posts are set or electrical work is added for an operator. Ask the Los Feliz planning desk what applies to your property; we build to current code and can coordinate the paperwork if the city wants it.

Will a new gate look right on a 1920s Spanish Colonial home?

Yes, when the gate is spec’d for the property rather than pulled from a catalog. We match the original iron or wood profile, pick hardware that suits the era, and adapt the swing to your driveway slope so the gate sits and moves the way period craftsmanship intended.

Brands We Service in Los Feliz

We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Our familiarity with Elite and Mighty Mule residential operators and LiftMaster and FAAC commercial boards means we diagnose what a generalist guesses at. Parts for common Los Feliz setups are stocked in our Highland Park shop, so most repairs do not wait on a distributor. See our brands for detail on the systems we work on.

Pricing for Gate Company in Los Feliz, CA

Neighborhoods We Serve in Los Feliz

We work throughout Los Feliz, from the flats around Hillhurst and Vermont to the steep streets climbing toward Griffith Park. A dispatcher gathers the details of your gate and system, and we route the nearest qualified technician to you. Fast dispatch from 7am to 7pm, Sunday through Friday.

• Los Feliz Village
• The Oaks
• Laughlin Park
• Fernwood
• Bronson Canyon area

Service Area – Cities Near Los Feliz

Sentinel Gate Repair covers Los Feliz and the surrounding Eastside and central Los Angeles communities. We regularly drive the short distances to East Hollywood, CA, Atwater Village, CA, Westlake, CA, and Glassell Park, CA for gate repair and installation. The same specialists, the same stocked parts, the same upfront pricing.

FAQs About Gate Company in Los Feliz